Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Houston, TX | Mortons Air Duct Houston
We provide independent Trane Air Duct Cleaning - Houston, and the one thing that sets our work apart here is simple: we know how Trane systems behave in Houston attics. A Trane air handler pulls air differently than other brands, and when flex duct sags or collapses in 150-degree attic heat, that difference shows up as whistle, dust, or a lockout code. Call (940) 314-5008 for a free estimate, and we’ll tell you what we see before we touch a thing.
Why Houston Residents Choose Us for Trane Service
Trane builds high-static air handlers with tighter coil fins than most manufacturers. That’s a good thing for efficiency, but it means ductwork flaws show up faster. We’ve spent years diagnosing those flaws in Houston homes, from the Heights to Katy, and we know how a Trane XR14 responds when return flex duct gets crushed under attic decking, which is why we also offer our Dryer Vent Cleaning in Houston. Paul Adeyemi grew up in Los Angeles and learned the trade at Los Angeles Trade-Technical College before spending nearly two decades cleaning and inspecting duct systems across Houston. He and his crew have worked in older Heights bungalows where the registers were painted over four times and the ductwork hadn’t been touched in twenty years. That kind of careful, unhurried work is what we’re known for. We quote a flat price before a single panel comes off, and we don’t move to the next vent until the previous one is done right.
We’re an independent Trane service provider, not a manufacturer affiliate or authorized dealer. That independence matters: we choose OEM Trane filters and Trane-approved mastic where they touch air handling equipment, and quality aftermarket parts for generic duct components like collars, flex sections, and grilles. We’ll also tell you plainly when a flex duct section is too degraded to clean and needs replacement instead. See our Trane sales & service page for more on how we handle Trane equipment.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Houston
- Collapsed return flex duct causing low-airflow lockouts. Houston’s slab-on-grade homes often have flex duct running through attics where storage decking crushes it. Trane systems throw “low airflow” lockout codes when this happens, and a basic cleaning won’t fix it. We video-inspect the return side, find the crushed section, and replace it with properly suspended flex.
- Condensation pooling in Hyperion air handler drain pans. Houston’s humidity is relentless, and Trane Hyperion air handlers are particularly prone to condensation buildup when the drain pan gets blocked with sludge. That moisture migrates into supply ducts. We clean the pan, clear the line, and treat the supply side so mold doesn’t return.
- Fine construction dust clogging XV18 blower wheels and coils. Variable-speed Trane XV18 heat pumps recirculate air constantly. After a kitchen remodel in Katy or Sugar Land, drywall dust gets pulled through the system and packs onto blower wheels and evaporator coils. Standard duct cleaning doesn’t address the equipment itself. We do evaporator coil cleaning as part of the job.
- High static pressure causing return ducts to whistle. Trane’s tighter coil fins mean the system pushes back harder when ducts are undersized or kinked. That whistle you hear in a Houston hallway is often a return duct fighting the air handler. We measure static pressure, locate the restriction, and fix the duct so the system runs like Trane designed it to.
- Fiberglass particles from separated flex duct liners. In attics that routinely exceed 150 degrees, flex duct inner liners bake and separate. Those fiberglass particles then get pulled into Trane equipment. We inspect for liner separation during every duct cleaning in Houston and recommend replacement when the duct is beyond saving.
Trane Service in Houston: What Local Conditions Mean for Your Equipment
Houston’s suburban expansion over the last fifteen to twenty years created thousands of Trane systems sitting in attics above slab foundations, where summer attic temperatures regularly climb past 150 degrees. That heat bakes flex duct. The inner liner separates from the outer jacket, and tiny fiberglass particles start moving through the system. No neighboring city faces the same combination of sprawl, slab construction, and attic temperature. In The Woodlands or Sugar Land, you might see high humidity, but you won’t see the same concentration of young slab homes with Trane equipment in superheated attics. When we open a return grille in a house built in 2008 off Highway 6, we know what we’re likely to find before we even look. That’s not a guess. It’s pattern recognition from doing this work across Houston for years.
Trane Models & Products We Service in Houston
We clean and repair ductwork tied to every major Trane line: XR14 air conditioners, XV18 variable-speed heat pumps, S9V2 two-stage gas furnaces, and Hyperion air handlers. For OEM parts, we stock Trane filters and Trane-approved mastic and sealants locally so we’re not waiting on a shipment when your system needs attention. For generic duct components, collars, flex sections, and grilles, we use quality aftermarket parts that match spec. If you’re in the broader Houston metro, check our Houston service area page to confirm coverage.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Houston
Duct cleaning for a typical single-family Houston home runs between $450 and $850, depending on square footage, the number of returns, and whether evaporator coil cleaning is included. Flex duct replacement runs $18 to $28 per linear foot installed, which covers the duct, suspension, and mastic sealing. Video inspection runs $75 to $150 and is credited toward any repair work. Every estimate is a written flat price agreed before we start, and the 365-Day Done Right Promise means if it’s not right, we make it right. Call (940) 314-5008 for an exact quote. Estimates are free.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Houston
Condensation droplets blowing from your Trane air handler usually mean the condensate pan is overflowing due to a blocked internal drain, not the visible drain line. The fix is cleaning the pan and the internal drain path, not just snaking the outside line.
Houston’s humidity does cause mold in supply ducts, particularly when a Trane air handler’s drain pan overflows or condensation forms inside flex duct runs in unconditioned attics. But if a company tells you mold is present without showing you photos, that’s a red flag. Our video inspection gives you visual proof before we recommend anything. Call (940) 314-5008 for an honest assessment.
A high static pressure code on a Trane XV18 after a filter change usually points to a duct restriction, not the equipment. Trane’s tighter coil fins amplify duct issues. We check for crushed returns, undersized flex, or a filter that’s too restrictive. The fix is usually on the duct side, not the air handler.
Construction dust from a remodel is finer than normal household dust, and a variable-speed Trane XV18 recirculates it continuously. That dust packs into blower wheels and evaporator coils, not just the ducts. A basic duct cleaning misses the equipment. We include evaporator coil cleaning when construction dust is present. Call (940) 314-5008 for a full estimate.
Both sides need attention. Supply ducts push conditioned air into your rooms, but return ducts pull air back to the Trane air handler. If the return side is dirty, that dust flows directly onto your evaporator coil and blower wheel. Cleaning only the supply side leaves the heart of the system unprotected. We clean both, every time.
Service Areas Near Houston
We serve homes across Houston and the surrounding communities, including Trane service in The Woodlands, Trane service in Sugar Land, Richmond, Tomball, and Pasadena. If you’re within an hour of Houston, we can usually schedule you within a few days.
Book Your Trane Service in Houston Today
Paul Adeyemi and the team at Mortons Air Duct Houston are ready to inspect your Trane ductwork and give you a written price before any work starts. Call (940) 314-5008 today for a free estimate. We’ll tell you what we see, what it’ll take, and what it’ll cost, before we touch a thing.
Written by Paul Adeyemi, Owner at Mortons Air Duct Houston, serving Houston since 2005.