Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Honeywell Air Duct Cleaning in Houston: What to Know First
Honeywell air duct cleaning in Houston typically costs $425 – $780 for a full residential system, and most jobs are completed by our crew in 4 to 7 hours. We’re an independent Honeywell service provider – meaning we work on Honeywell filtration systems, media cabinets, bypass humidifiers, and the ductwork attached to them without being tied to any manufacturer’s sales agenda. If you own a Honeywell system and want the ducts cleaned right, with a written price before anything is opened up, call Paul and the Mortons Air Duct Houston team at (940) 314-5008.
This page is for Houston homeowners and small commercial operators who have Honeywell equipment and need a duct cleaning crew that understands what’s actually inside those systems. Honeywell doesn’t clean ducts, and they won’t crawl into your attic. We do, and we’ve been doing it across Houston since 2005.
How Honeywell Products Fail – and How We Fix Them
Honeywell makes solid equipment. But solid equipment still gets dirty, and in Houston, the humidity and fine clay soil dust combine into a particular kind of buildup that behaves differently inside Honeywell systems than it does in other brands. Here’s what we routinely see on Houston Honeywell jobs:
- Honeywell F300/F200 electronic air cleaners with caked-on collection cells. These units pull particles magnetically, but once the cells are loaded, they stop catching anything. People forget they exist because they’re wired in line and silent. We remove the cells, clean them with the correct solution, check the ionizer wires, and clean the duct sections on both sides of the cabinet. That’s the part most disconnects before us skip – the ducting around the unit carries as much fine dust as the cells themselves.
- Honeywell TrueCLEAN and media filter cabinets with bypassing air. The 4- and 5-inch media cabinets seal around the filter frame, but if a Houston home has had foundation settling, the cabinet door gasket or the cabinet-to-plenum connection can pull loose. Dirty air then slips past the filter entirely. We’ll inspect that seal, reseat or replace the gasket, and clean the return plenum so your new media filter isn’t doing double duty on its first week.
- Honeywell bypass humidifiers (HE260/HE360) with mineral and dust mats clogging the pad and the return. In Houston, hard water plus fine dust creates a paste that blocks airflow through the humidifier and into the return duct. Some pad frames won’t come out without cleaning the surrounding sheet metal first. We service the humidifier area as part of a full system cleaning and flag the pad condition before leaving. You’ll know if it needs a new pad. We won’t surprise you with one.
- Supply runs off Honeywell UV lamp systems with bacterial shadow zones. When a Honeywell UV system is installed downstream of an existing dirty evaporator or blower, the light treats what’s near the bulb, but dust-shaded areas upstream stay moist and microbially active. Houston’s shoulder seasons are prime for this – mild weather, less runtime, all that spring pollen settling in. We clean the full upstream path so the UV system works on the air passing through it, not just the air that happens to touch the bulb.
- Flex ducts and boot connections that have never been properly attached on builder-grade Honeywell installs. In new construction across the Houston suburbs – Katy, Pearland, Cypress, Sugar Land – we see Honeywell electronic air cleaners tied to flex runs that sag, kink, or lose their zip ties where the flex meets the boot. Duct cleaning in those homes means repairing the mechanical connection first, then cleaning. Otherwise you’re just blowing air into the attic or wall cavity and calling it a service.
None of these are Honeywell manufacturing failures. They’re install realities and Houston climate realities. But they’re the difference between a duct cleaning that holds up for years and one that dusts the problem over until next spring.
Styles & brands we work with
Our Honeywell Air Duct Cleaning Process
Every Honeywell job we do in Houston follows the same path, and the path starts with the price:
- 1
Call (940) 314-5008. You’ll get Paul or a member of the crew on the phone. We’ll ask square footage, number of systems, whether you have Honeywell filtration or humidification attached, and whether you’ve had any recent renovation work. Then we’ll give you a flat price range before we leave the shop.
- 2
Walkthrough and written quote. On arrival, we inspect the return drop, the supply plenum, the Honeywell cabinet or cleaner if one’s present, and a few register boots. We write the price down and hand it to you before a single panel is removed. The price doesn’t move once the work starts.
- 3
Containment and protection. Shoe covers on, drop cloths under every register we work, and the equipment we use – Rotobrush and Nikro air tools – is run with HEPA-filtered negative airflow. Pet areas get extra care. If there’s a napping kid, we’ll work the far end of the house first and come back.
- 4
Agitation, extraction, and component cleaning. We clean each supply run, the return drop, the main trunk, and the Honeywell unit if it’s installed in line. Electronic cells, media cabinets, and humidifier bypass sections get specific attention, and we check the seal at every transition.
- 5
Video verification. Before we pack up, we run a small camera into the main trunk and a few branch lines so you can see the inside of your own ducts, clean, on our screen. You don’t take our word for it. You’ll see the before photo from the walkthrough and the after photo from the same spot.
- 6
Photo of the cleanup. Our last step is a picture of the room with the equipment packed, floors uncovered, and registers back in place. You’ll have that photo before we pull out of the driveway. The 365-Day Done Right Promise is printed on every invoice: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Honeywell Air Duct Cleaning Costs in Houston
Here’s the honest price structure we quote over the phone, for a Houston single-family home with one forced-air system:
- Full system cleaning (all supplies, returns, main trunk, air handler, blower, plenum): $425 – $650 for most homes up to 2,800 square feet. Larger homes or dual-system homes run higher.
- Full system cleaning with Honeywell electronic air cleaner cell removal and wash: $525 – $720. The cell work adds time and the wash solution isn’t household degreaser.
- Add a Honeywell bypass humidifier pad replacement and cabinet clean: $35 – $60 for the pad, plus included labor if done as part of the full clean. On its own, the visit minimum is $149.
- Commercial Honeywell systems (offices, clinics, light retail): $700 – $1,400 depending on tonnage and trunk length. We quote by the system, not by the vent.
You’ll notice we never quote a per-vent price. That’s how this industry baits people – a low per-vent number that doesn’t include the trunk, the plenum, or the air handler. Our price is one flat number, written down, before the work starts. It’s the same number on the invoice. Call (940) 314-5008 and we’ll give you an exact quote for your Honeywell system.
Why Houston Homeowners Call Mortons Air Duct Houston for Honeywell Work
The Houston HVAC world is full of companies that will clean any duct attached to anything, as fast as possible, for as much as they think you’ll pay. That’s not our model. Paul Adeyemi has been cleaning and inspecting duct systems around Houston for close to two decades – he came up through Los Angeles Trade-Technical College, but he’s learned more from the older houses in the Heights, where a return drop hasn’t been opened since the first Bush administration and the register screws are painted over four times. He’s the one who answers the phone most days, and he’ll tell you what he sees, what it’ll take, and what it’ll cost – before he touches a thing.
We work on Honeywell every week, and we’re also deep into Lennox, Trane, and Carrier, which matters when a house has mixed equipment or a builder put a Honeywell cabinet on a Trane furnace because it was on the truck that day. Our crew is background-checked and uniformed, and we work to the Cedarwell Care Promise – the reason every visit includes shoe covers, drop cloths, and a photo of the clean-up before we leave. The 365-Day Done Right Promise is the backstop: if the job isn’t done right, we come back and make it right, full stop. No fine print, no pro-rated second visit charge.
FAQs
No, duct cleaning does not void a Honeywell warranty, provided the service does not physically modify or damage the Honeywell components. Honeywell warranties cover manufacturing defects in the equipment itself, not the condition of the ductwork. We clean without altering cabinets, wiring, or controls, and for Honeywell electronic air cleaner cells, we wash rather than aggressively brush or blast the collection plates so you keep your coverage intact. The rare exception is if a Honeywell component itself is failing and would need replacement regardless of cleaning – we’ll tell you before we touch it, not after.
We use OEM Honeywell parts when the repair involves the Honeywell unit’s core function – ionizer wires, door gaskets, humidity control boards, media cabinet seals. For generic components like flex duct connectors, sheet metal transitions, and access panel fasteners, we’ll use quality aftermarket parts that meet the same gauge and fitment. If a job calls for a Honeywell-specific part, we’ll quote the OEM price, and you’ll see it on the written quote before any work starts.
Every 3 to 5 years for most Houston homes, with two local exceptions: homes with pets that shed heavily (closer to every 2 to 3 years) and homes with Honeywell electronic air cleaners that haven’t had their cells washed in over a year (the upstream clog masks how dirty the duct system has become). Houston’s humidity and the fine clay soil dust from the Katy Prairie and Brazos River valley push that number shorter than a dry climate would. If you can’t remember the last cleaning, it’s probably time. Call (940) 314-5008 for an honest over-the-phone sense of whether yours needs it now or can wait.
Because they’re priced by the vent, and the final invoice rarely matches the phone quote. The cheap price is the hook: $49 for 10 vents, then the trunk, the plenum, the blower, and the return all get added on-site as “required add-ons.” By the time the truck’s parked, you’re looking at $800, but the guy is already there, you took off work, and you pay it. Our price is one flat number per system, written down before a panel comes off. That’s the difference. We’re not the cheapest phone quote. We’re the cheapest honest one.
You’ll see it. We run a camera before and after, and you watch the after footage on our screen while the equipment’s still set up in the room. Plus, the photo of the clean-up and the 365-Day Done Right Promise back the whole job. If you climb into the attic a month later and find something we said we cleaned, call us. We come back.
For Honeywell air duct cleaning in Houston, with a written flat price and a crew that works like the house belongs to someone who lives there, call (940) 314-5008. We’ll talk through what you have, what it likely needs, and what it’ll cost – before anyone touches the ductwork.
Written by Paul Adeyemi, Owner, Mortons Air Duct Houston at Mortons Air Duct Houston, serving Houston and nearby areas.