Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Dryer Vent Cleaning in Houston: What to Know First
Dryer vent cleaning for Abatement Technologies systems in Houston typically runs $130 to $240 for a full cleaning, and most appointments are completed in under two hours. We’re an independent Abatement Technologies service provider, not a manufacturer affiliate, which means we make decisions based on what’s best for your home and your system, not a corporate playbook. If you’ve noticed longer dry times or a dryer that feels warmer than it should on the outside, call (940) 314-5008 and we’ll walk you through what we’re likely to find before we ever schedule the visit. This page is written for Houston homeowners who own Abatement Technologies ventilation or filtration equipment and want a dryer vent cleaning done carefully, with a written price agreed to before any work begins.
How Abatement Technologies Products Fail – and How We Fix Them
Abatement Technologies builds solid equipment, much of it for healthcare and commercial environments where air quality is treated as a serious matter. But the residential and light commercial units we see across Houston have their own patterns. Here’s what we actually find on service calls, series by series:
- Abatement Technologies HEPA-AIRE units with restricted exhaust paths. These units are engineered to move air through dense filtration media, which means the exhaust side works harder than a standard residential system. When the dryer vent is even partially blocked with lint, the back pressure climbs faster than most owners expect. We clean the full vent run and then measure air velocity at the vent cap to confirm the system is moving air the way Abatement’s engineering intended.
- CAP series and portable air scrubbers used in laundry areas. Houston humidity means lint doesn’t just sit in the vent; it clumps. We see CAP series filters loaded with lint because the laundry exhaust wasn’t directed away from the unit. Our fix includes cleaning the vent and then advising on a simple exhaust redirection so the scrubber isn’t fighting the dryer’s output.
- PAS and PRED series units with inlet-side lint accumulation. In homes where the dryer sits near a filtration unit, fine lint gets pulled across the room and onto the pre-filters. That’s not a defect; it’s a placement problem. We clean the vent thoroughly, then show you where the lint is entering so you can decide if moving the unit a few feet makes sense.
- Older Abatement Technologies residential venting kits with brittle plastic components. Houston’s attic heat, which regularly exceeds 140 degrees in August, degrades plastic vent connectors faster than metal. If we find brittle or cracked components, we’ll show you before replacing anything and quote options: OEM replacement or a metal aftermarket part that costs less and typically outlasts the original in a Houston attic.
- Flexible transition ducts connected to Abatement units with improper sizing. We regularly see transition ducts that are too small for the unit’s rated airflow. The result is a vent that clogs faster and a unit that runs hotter than it should. We’ll measure, compare against the unit’s spec, and correct the transition if needed. This is one of the most common issues we find in Houston homes, and it’s an easy fix most homeowners never get because nobody measured.
Styles & brands we work with
Our Abatement Technologies Dryer Vent Cleaning Process
Every job follows the same deliberate sequence, whether it’s a standard dryer vent cleaning or something more involved. Here’s what happens when you call us for Abatement Technologies equipment in Houston:
- 1
Phone walkthrough. You describe the system and what you’re seeing. We give you a rough price range and tell you honestly whether we think this is a cleaning or something more. Paul often takes these calls himself.
- 2
On-site inspection with written price. Before any work starts, we inspect the vent run, the Abatement unit, and the surrounding area. Then we put a flat price in writing. That number doesn’t change unless we find something genuinely unexpected, and we’ll show you before we proceed.
- 3
Containment and protection. Shoe covers go on at the door. Drop cloths go down around the work area. We use HEPA-filtered equipment from Rotobrush and Nikro to clean without blowing lint through the house.
- 4
The cleaning. We run professional brushes and negative-air collection through the full vent run, not just the first few feet. On Abatement units, we also check the exhaust path and filter seating for anything that reduces airflow.
- 5
Verification and documentation. We test airflow at the vent cap, take before-and-after photos, and show you what came out. Before we leave, we photograph the cleanup area so you know we left the house as we found it.
See the difference
Before
After
Before
After
Before
AfterWhat Abatement Technologies Dryer Vent Cleaning Costs in Houston
Here are the numbers families ask about most, so you can plan before you call. A standard dryer vent cleaning for an Abatement Technologies residential setup in Houston runs $130 to $240, depending on vent length and accessibility. If the vent run is unusually long (20 feet or more), expect $180 to $280. Adding a bird guard or new vent cap runs $40 to $90 for the part plus a modest installation fee. Full vent rerouting, which some Houston homeowners need because the original run was poorly designed, typically runs $350 to $650. We don’t do per-vent pricing and we don’t quote one number on the phone and another at the door. One flat price per system, written down, before work starts. Call (940) 314-5008 and we’ll give you an exact range for your home.
Why Houston Homeowners Call Mortons Air Duct Houston for Abatement Technologies Work
Since 2005, we’ve been cleaning dryer vents and air ducts in Houston homes, and we’ve seen how the hot, humid climate here affects Abatement Technologies equipment differently than it would in a drier city. Paul Adeyemi, who owns Mortons Air Duct Houston, learned his trade at Los Angeles Trade-Technical College and has spent the better part of two decades inspecting and cleaning duct systems across Houston, from the Heights to newer subdivisions. Every job carries the 365-Day Done Right Promise: if the work isn’t right, we make it right. Our techs are background-checked, uniformed, and work to the Cedarwell C.A.R.E. values, which means shoe covers, drop cloths, quiet tools during nap hours, and pet-safe product choices. We also service dryer vent systems tied to Lennox, Trane, and Carrier equipment, so if you have mixed brands in your home, one call handles it. We use professional equipment from Rotobrush, Nikro, Honeywell, Aprilaire, Abatement Technologies, and Guardsman, and every job ends with a photo of the clean-up before the crew leaves.
FAQs
No. Routine dryer vent cleaning is standard maintenance and does not void manufacturer warranties. We don’t open sealed components or modify the unit itself; we clean the vent run and the exhaust path, which is exactly what the warranty expects you to maintain. If we find something inside the unit that needs repair, we’ll flag it and recommend you contact an authorized service provider rather than risking your coverage.
If your dryer takes longer than one cycle to dry a full load, or if the dryer exterior feels unusually warm during a cycle, the vent is likely restricted. On the filtration side, if you notice reduced airflow from the unit or a musty smell when it runs, that’s another sign of restriction. We measure air velocity at the vent cap during service and show you the before-and-after readings. Call (940) 314-5008 to schedule a check if any of this sounds familiar.
Most residential jobs take between 60 and 90 minutes from setup to clean-up. If the vent run is long, clogged, or needs a part replacement like a vent cap or bird guard, expect up to two hours. We’ll give you a time window when you book and we don’t rush the job to stay under a clock.
Low-priced offers often come with per-vent upcharges or a technician who finds “extra work” once the van is in your driveway. We quote one flat price per system, in writing, before anything is touched. If a company can’t tell you the total price over the phone, that’s usually because it’s going to grow. For an honest range on your specific home, call (940) 314-5008 and we’ll tell you what to expect.
Houston’s humidity makes lint clump and stick inside vents in a way it doesn’t in drier climates. Combined with long vent runs common in larger Texas homes, clogged vents here cause longer dry times, higher energy bills, and in the worst cases, dryer fires. The National Fire Protection Association lists dryer vent cleaning as the single most important step to prevent dryer fires. It’s not an upsell; it’s maintenance that matters more in Houston than almost anywhere else in the country.
Written by Paul Adeyemi, Owner, Mortons Air Duct Houston at Mortons Air Duct Houston, serving Houston and nearby areas.