Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Dryer Vent Cleaning in Houston: What to Know First
Nikro dryer vent cleaning in Houston typically runs $149 – $289 for a full system clean, and Morton’s Air Duct Houston completes most Nikro jobs in a single visit. We’re an independent service provider – not affiliated with Nikro – and we quote a flat price before any work begins, using professional Nikro inspection and cleaning equipment on every job. If you own a Nikro dryer and the vent hasn’t been cleaned in over a year, call (940) 314-5008 and we’ll tell you exactly what the job will cost before we touch a thing.
How Nikro Products Fail – and How We Fix Them
Nikro builds solid equipment, but no dryer vent is immune to Houston’s climate. Here’s what we actually see on Nikro systems across the city, from the Heights to Katy:
- Lint accumulation at the dryer transition hose on Nikro residential dryers. Nikro units often sit in tight laundry closets where the flex hose gets pinched or kinked. That bend becomes a lint trap, and within six to eight months it can restrict airflow enough to double dry times. We remove the hose, clean it fully, and re-route it with a gentler radius so lint can’t build up in the same spot.
- Slow drying with no visible blockage. On Nikro dryers with internal moisture sensors, we frequently find the sensor lens coated in a fine film of dryer-sheet residue. The sensor misreads dampness and the cycle ends early, which owners mistake for a vent problem. We clean the sensor and the full vent run in one visit, so the dryer actually finishes the job.
- Exterior vent hood flutter or sticking on Nikro installations. The flapper on Nikro-style vent hoods gets heavy with Houston humidity and a layer of lint paste. It either sticks open, letting in humid air and the occasional gecko, or sticks shut and trips the thermal limiter. We clean or replace the hood assembly and verify the flap moves freely before we leave.
- Lint bypassing the filter on older Nikro dryer models. Some early Nikro residential units used a thinner filter frame that warps with heat. Once warped, lint slips around the edges and packs into the blower wheel. Owners notice a rattling sound first. We open the blower housing, clear the wheel, and seat a correct-fit filter so it stops happening.
- Roof-terminated Nikro vents in two-story Houston homes. We see these in older neighborhoods like Timbergrove and Meyerland, where the vent runs 15 to 20 feet straight up. Gravity pulls lint back down into the pipe between cleanings. On these, we recommend a clean every 10 to 12 months instead of the usual 12 to 18, and we can install a roof jack with a removable screen that makes future cleanings faster.
Styles & brands we work with




Our Nikro Dryer Vent Cleaning Process
Here’s how a Nikro job goes at Morton’s Air Duct Houston, from the first call to the final walkthrough:
- 1
You call or book online. A live person answers. You describe your dryer, the vent setup, and anything unusual: longer dry times, a burning smell, the dryer stopping mid-cycle.
- 2
We quote a flat price before we arrive. No hourly billing, no surprise line items. The price for your Nikro vent cleaning is written down before the van shows up.
- 3
We protect your home. Shoe covers and drop cloths go down before any equipment comes through the door. We work around nap schedules and keep tools quiet where we can.
- 4
We inspect the full run. We disconnect the dryer, inspect the transition hose, the interior duct, and the exterior termination. On Nikro units, we check the filter seat and moisture sensor since those affect vent performance more than most owners realize.
- 5
We clean with professional Nikro equipment. Rotary brushes and high-suction collection keep dust from drifting back into the laundry room. We clean the vent, the transition hose, and the hood assembly.
- 6
We test, photograph, and walk you through it. We run the dryer on air-only to confirm flow, show you before-and-after photos, and leave you with a picture of the cleaned work area before we go. Every job carries the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Nikro Dryer Vent Cleaning Costs in Houston
Here’s what Nikro dryer vent cleaning costs in Houston, honest numbers:
| Job Type | Typical Price Range |
|---|---|
| Standard Nikro vent cleaning, single-story, short run | $149 – $189 |
| Two-story home or long vent run (15+ feet) | $189 – $249 |
| Roof-terminated vent cleaning | $219 – $289 |
| Vent hood or cap replacement | $45 – $85 (part and labor) |
| Bird guard installation | $60 – $110 |
| Lint removal from blower housing (if packed) | $75 – $120 added to the cleaning |
The price moves based on vent length, roof access, and whether the hood or transition hose needs replacing. We quote the full price before we start, and that price is the price. Call (940) 314-5008 for a free estimate on your specific Nikro setup.
Why Houston Homeowners Call Mortons Air Duct Houston for Nikro Work
We’ve been cleaning dryer vents in Houston since 2005, and Nikro equipment has been a constant on the job. Our techs train specifically on Nikro disassembly, filter seating, and sensor cleaning because those three details determine whether a drying problem actually goes away. We bring professional Nikro tools and we carry quality aftermarket parts when an OEM part isn’t necessary, saving you money without cutting corners. If your home also has a Lennox, Trane, or Carrier HVAC system, our air duct team handles those too, so one visit can cover more than the dryer vent. Every job runs on the Cedarwell Care Promise: a written price before work starts, shoe covers and drop cloths, a photo of the cleanup, and the 365-Day Done Right Promise behind it all. Paul Adeyemi quotes every Nikro job the same way: we’ll tell you what we see, what it’ll take, and what it’ll cost, before we touch a thing.
FAQs
No. Dryer vent cleaning is routine maintenance and does not void the Nikro warranty. In fact, a clogged vent causes overheating that can damage components, which warranties typically don’t cover. Our process is non-invasive: we disconnect, clean, and reconnect the vent without opening the dryer cabinet unless a repair requires it.
Most Houston homes with a Nikro dryer need vent cleaning every 12 to 18 months. Humid air makes lint stickier and Houston’s hard water shortens dryer-sheet breakdown time, so your vent loads up faster than it would in a drier climate. If your vent runs to the roof or exceeds 15 feet, plan for every 10 to 12 months.
It depends on the part. For vent hoods, bird guards, and transition hoses, quality aftermarket parts are usually equal to OEM and cost less, so that’s what we recommend. For anything inside the dryer itself on a Nikro unit, we’ll talk through OEM versus aftermarket with you and let you decide before we order. You always know the cost before work happens.
Usually, but not always. We keep daily openings for dryer vent jobs across Houston, and many Nikro cleanings happen within a day or two of the call. If you’re dealing with a loud blower wheel or the dryer keeps stopping, tell us when you call and we’ll prioritize the visit. A live person answers (940) 314-5008.
You’ll see it. We take before-and-after photos of the inside of your vent and the exterior hood, and we show them to you before we leave. You also get a photo of the cleaned work area. If anything doesn’t look right within 365 days, the Done Right Promise means we come back and make it right.
Written by Paul Adeyemi, Owner, Mortons Air Duct Houston at Mortons Air Duct Houston, serving Houston and nearby areas.